Skip to Content
Rasid integrated technologies
Request a solution
  1. All products
  2. Public Address & Audio
  3. IP Network Audio
  4. DSPPA POE6311 PoE IP Network Ceiling Speaker, 2x9W Built-in Amplifier
  5. IP Network Audio

DSPPA POE6311 PoE IP Network Ceiling Speaker, 2x9W Built-in Amplifier

  • Can be mounted to any place accessible to network.
  • Support maximum 48kHz sampling rate, 16bit digital audio stream decoding.
  • Built-in 2×9W digital amplifier, with low power consumption.
  • Can play the background music, emergency paging, alarm signals from the system host.
  • Local output volume and local play status can be controlled.
  • Provide a complete interface that complies with the IEEE 802.3af / at standard of the Power over Ethernet (PoE) system and a DC15V power supply interface, with two optional power supply modes for switching.
  • Strong clip design, easy to install.
DSPPA
Price
⃁ 809.96 ⃁ 809.96 ⃁ 1,012.45
(Tax excluded)
Ask on WhatsApp Quote for quantities
  • Delivery within 2–5 business days across Saudi Arabia
  • Warranty according to the manufacturer
  • Tax invoice with every order
  • Technical support before and after purchase

Not sure this model fits your setup? Read the buying guide

Documents
data-sheet-poe6311-ip-network-ceiling-speaker.pdf

Technical Specifications – POE6311

Tone Adjustment0～14 (±2) (60Hz) +7, -8 (±2) (10KHz)
MAX. SPL.102dB
THD≤1%
Effective Output Power≥9W
Input Sensitivity-10±1dB
Frequency Response40-18KHz (±3dB)
SNR (A)≥70dB
Power2×9W
Power SupplyIEEE 802.3 at PoE
Package Size255×255×185mm
Machine SizeΦ185×114mm
Gross Weight2.5kg
Net Weight1.5kg

Source: DSPPA official website. Specifications are subject to change by the manufacturer.

PRACTICAL ANSWERS

Network planning questions

Should I choose a router, a switch or an access point?

Start with the task: connecting networks, adding wired device ports, or providing wireless coverage. A single installation may need more than one device type. Share a site diagram and device list so the proposed roles and connections are clear.

Why is wireless coverage weak in some rooms?

Check the access point location, building layout, obstacles and the number of active devices. Measure coverage where people actually work before choosing extra equipment; changing the internet package alone may not address a coverage problem.

How do I select a switch for powered network devices?

List the devices to be connected and check each device’s power requirements against the switch’s per-port capability and total documented power budget. Also review uplink capacity and reserve ports for the expansion you actually expect.

Can the guest network be separated from business devices?

Define which devices and services guests should be able to reach, then check whether the router, switch and access points support the required separation. Test the resulting access rules; a different wireless network name alone is not the acceptance test.

What information helps plan a network upgrade?

Provide floor plans, current equipment models, internet connections, cabling details and peak device counts. Describe the applications that matter most and the observed problem, such as disconnections or slow local file access.

How should network performance be checked after installation?

Agree on the locations and representative workloads to test, then record wired and wireless results separately. Check connectivity, coverage and access rules during normal use, and retain a diagram and configuration backup for support.

Explore this topic