[G1126P-24-410W] IP-COM G1126P-24-410W 24-Port Gigabit PoE Rack Switch, 2 SFP Uplinks, 370W PoE

IP-COM G1126P-24-410W 24-Port Gigabit PoE Rack Switch, 2 SFP Uplinks, 370W PoE

24 x Gigabit PoE ports
2 x SFP combo fiber uplink ports
Max. PoE output 370W, up to 30W per port
336 Gbps switching capacity, 126 Mpps forwarding
4 DIP-switch modes: surveillance, port priority, extend, VLAN isolation
Extend mode up to 250 m on ports 17–22
Rack-mount design with 6 kV lightning protection

IP-COM

Ask on WhatsApp Quote for quantities

Delivery within 2–5 business days across Saudi Arabia
Warranty according to the manufacturer
Tax invoice with every order
Technical support before and after purchase

Not sure this model fits your setup? Read the buying guide

Technical Specifications – G1126P-24-410W

Model	G1126P-24-410W
Network standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3z, IEEE 802.3af, IEEE 802.3at
LED indicators	1 Link/Act LED per Gigabit port; 1 Power LED per device; 1 PoE Max LED per device
Fixed ports	24 x 100/1000Base-TX Ethernet ports (Data/Power); 2 x 1000Base-X SFP ports (combo)
Lightning protection	Port: 6 kV; Power supply: 6 kV
Forwarding mode	Store-and-forward
Switching capacity	336 Gbps
Packet forwarding rate	126 Mpps
Switching buffer	4M
MAC address table	8K
Power pin assignment	1/2/4/5 positive (+), 3/6/7/8 negative (−)
PoE power supply	Max. PoE output power: 370W; Max. output power per port: 30W
Input voltage	AC 220V 50Hz
Dimensions (L x W x H)	440 x 284 x 44 mm
Port features	Controlled by a hardware DIP switch on the front panel, four modes: Surveillance mode – optimizes uplink port buffer to resolve uplink bandwidth bottlenecks; Port priority – ports 1–8 are high-priority ports, greatly reducing packet loss and lag during network congestion; Network extend – ports 17–22 support transmission distance up to 250 m, all ports can communicate; VLAN isolation – ports 1–14 cannot communicate with each other but can communicate with uplinks 23, 24, SFP1 and SFP2, isolating broadcast storms and DHCP conflicts
Environment	Operating temperature: 0°C to 45°C; Storage temperature: -40°C to 70°C; Operating humidity: 10%–90% RH, non-condensing; Storage humidity: 5%–90% RH, non-condensing
Certifications	CCC

Source: IP-COM official website. Specifications are subject to change by the manufacturer.

PRACTICAL ANSWERS

Network planning questions

Should I choose a router, a switch or an access point?

Start with the task: connecting networks, adding wired device ports, or providing wireless coverage. A single installation may need more than one device type. Share a site diagram and device list so the proposed roles and connections are clear.

Why is wireless coverage weak in some rooms?

Check the access point location, building layout, obstacles and the number of active devices. Measure coverage where people actually work before choosing extra equipment; changing the internet package alone may not address a coverage problem.

How do I select a switch for powered network devices?

List the devices to be connected and check each device’s power requirements against the switch’s per-port capability and total documented power budget. Also review uplink capacity and reserve ports for the expansion you actually expect.

Can the guest network be separated from business devices?

Define which devices and services guests should be able to reach, then check whether the router, switch and access points support the required separation. Test the resulting access rules; a different wireless network name alone is not the acceptance test.

What information helps plan a network upgrade?

Provide floor plans, current equipment models, internet connections, cabling details and peak device counts. Describe the applications that matter most and the observed problem, such as disconnections or slow local file access.

How should network performance be checked after installation?

Agree on the locations and representative workloads to test, then record wired and wireless results separately. Check connectivity, coverage and access rules during normal use, and retain a diagram and configuration backup for support.