[G1116P-16-150W] IP-COM G1116P-16-150W 16-Port Gigabit PoE Rackmount Switch, 135W PoE, Surveillance Mode

IP-COM G1116P-16-150W 16-Port Gigabit PoE Rackmount Switch, 135W PoE, Surveillance Mode

16 x Gigabit PoE ports, up to 30W per port
<135W total PoE power
32 Gbps switching capacity
4 modes: standard, surveillance, VLAN isolation, isolation
PoE port priority mechanism
6KV port and power lightning protection
Rackmount unmanaged design

IP-COM

Ask on WhatsApp Quote for quantities

Delivery within 2–5 business days across Saudi Arabia
Warranty according to the manufacturer
Tax invoice with every order
Technical support before and after purchase

Not sure this model fits your setup? Read the buying guide

Technical Specifications – G1116P-16-150W

Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3af, IEEE 802.3at, IEEE 802.3z
MTBF	≥100,000 hours
Fixed ports	16 x 10/100/1000Base-T Ethernet ports; 16 PoE ports, max 30W per port; PoE port priority mechanism supported
Features	Supports four operating modes: standard switching, surveillance mode, VLAN isolation and isolation mode
LED indicators	1 Link/Ack LED per Gigabit port; 1 PoE status LED per Gigabit port; 1 Power LED per device; 4 mode status LEDs per device (M1, M2, M3, M4)
Performance	Store-and-forward: Supported; Switching capacity: 32Gbps; MAC address table: 8K
Lightning protection	Port: 6KV; Power: 6KV
Power consumption	Total power consumption: 150W; PoE power: <135W
Power input	100-240VAC, 50/60Hz
Dimensions	294mm x 178.8mm x 44mm
Operating environment	Temperature: 0°C to 40°C; Humidity: 10% to 90%RH, non-condensing
Storage environment	Temperature: -40°C to 70°C; Humidity: 5% to 90%RH, non-condensing
Port features	Four modes: M1 Standard sharing: works as a normal unmanaged switch and can be used as a central switch. M2 Surveillance mode: optimizes uplink port buffer to resolve uplink bandwidth bottlenecks. M3 VLAN isolation: ports 1-14 are isolated from each other but all communicate with ports 15 and 16, isolating DHCP broadcasts and reducing broadcast storms. M4 Isolation mode: ports 1-8 and ports 9-16 are in two different VLANs, separating the surveillance network from the wireless network without interference.
Certifications	FCC, CE, RoHS, CCC

Source: IP-COM official website. Specifications are subject to change by the manufacturer.

PRACTICAL ANSWERS

Network planning questions

Should I choose a router, a switch or an access point?

Start with the task: connecting networks, adding wired device ports, or providing wireless coverage. A single installation may need more than one device type. Share a site diagram and device list so the proposed roles and connections are clear.

Why is wireless coverage weak in some rooms?

Check the access point location, building layout, obstacles and the number of active devices. Measure coverage where people actually work before choosing extra equipment; changing the internet package alone may not address a coverage problem.

How do I select a switch for powered network devices?

List the devices to be connected and check each device’s power requirements against the switch’s per-port capability and total documented power budget. Also review uplink capacity and reserve ports for the expansion you actually expect.

Can the guest network be separated from business devices?

Define which devices and services guests should be able to reach, then check whether the router, switch and access points support the required separation. Test the resulting access rules; a different wireless network name alone is not the acceptance test.

What information helps plan a network upgrade?

Provide floor plans, current equipment models, internet connections, cabling details and peak device counts. Describe the applications that matter most and the observed problem, such as disconnections or slow local file access.

How should network performance be checked after installation?

Agree on the locations and representative workloads to test, then record wired and wireless results separately. Check connectivity, coverage and access rules during normal use, and retain a diagram and configuration backup for support.