[G1105P-4-63W] IP-COM G1105P-4-63W 5-Port Gigabit Desktop Switch, 4 PoE Ports, 58W PoE

IP-COM G1105P-4-63W 5-Port Gigabit Desktop Switch, 4 PoE Ports, 58W PoE

5 x Gigabit Ethernet ports
4 PoE ports (IEEE 802.3af/at)
Max. PoE output 58W (total power <63W)
10 Gbps switching capacity, wire-speed forwarding
VLAN isolation mode via DIP switch
6 kV port lightning protection
Compact desktop design with built-in AC power

IP-COM

Ask on WhatsApp Quote for quantities

Delivery within 2–5 business days across Saudi Arabia
Warranty according to the manufacturer
Tax invoice with every order
Technical support before and after purchase

Not sure this model fits your setup? Read the buying guide

Technical Specifications – G1105P-4-63W

Network standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3af, IEEE 802.3at
LED indicators	1 Link/Act LED per Gigabit port; 1 PoE LED per Gigabit PoE port; 1 Power LED per device
Fixed ports	4 x 10/100/1000Base-T Ethernet ports (Data/Power); 1 x 10/100/1000Base-T Ethernet port (Data); All ports support wire-speed forwarding
Port lightning protection	6 kV
Store-and-forward	Supported
Switching capacity	10 Gbps
Packet forwarding rate	7.44 Mpps
MAC address table	2K
PoE power supply	Ports 1–4 support IEEE 802.3af/at PoE
Power pin assignment	1/2/4/5 positive (+), 3/6/7/8 negative (−)
Input voltage	198–262V AC, 50/60Hz
Dimensions (L x W x H)	100 x 100 x 26 mm
Power consumption	Total power consumption: <63W; Max. PoE output power: 58W
Port features	Controlled by a hardware DIP switch on the front panel, two modes: Standard sharing – all ports can communicate, works as a standard unmanaged PoE switch; VLAN isolation – ports 1–4 cannot communicate with each other but can all communicate with uplink port 5, isolating broadcast storms and DHCP broadcasts
Environment	Operating temperature: 0°C to 40°C; Storage temperature: -40°C to 70°C; Operating humidity: 10%–90% RH, non-condensing; Storage humidity: 5%–90% RH, non-condensing

Source: IP-COM official website. Specifications are subject to change by the manufacturer.

PRACTICAL ANSWERS

Network planning questions

Should I choose a router, a switch or an access point?

Start with the task: connecting networks, adding wired device ports, or providing wireless coverage. A single installation may need more than one device type. Share a site diagram and device list so the proposed roles and connections are clear.

Why is wireless coverage weak in some rooms?

Check the access point location, building layout, obstacles and the number of active devices. Measure coverage where people actually work before choosing extra equipment; changing the internet package alone may not address a coverage problem.

How do I select a switch for powered network devices?

List the devices to be connected and check each device’s power requirements against the switch’s per-port capability and total documented power budget. Also review uplink capacity and reserve ports for the expansion you actually expect.

Can the guest network be separated from business devices?

Define which devices and services guests should be able to reach, then check whether the router, switch and access points support the required separation. Test the resulting access rules; a different wireless network name alone is not the acceptance test.

What information helps plan a network upgrade?

Provide floor plans, current equipment models, internet connections, cabling details and peak device counts. Describe the applications that matter most and the observed problem, such as disconnections or slow local file access.

How should network performance be checked after installation?

Agree on the locations and representative workloads to test, then record wired and wireless results separately. Check connectivity, coverage and access rules during normal use, and retain a diagram and configuration backup for support.