[F1126P-24-250W] IP-COM F1126P-24-250W 24-Port PoE Rackmount Switch, 2 GE Uplinks + SFP, 230W PoE

IP-COM F1126P-24-250W 24-Port PoE Rackmount Switch, 2 GE Uplinks + SFP, 230W PoE

24 x 10/100 Mbps PoE ports (802.3af/at)
2 x Gigabit uplinks + 1 SFP combo port
230W total PoE, up to 30W per port
4 DIP-switch modes: standard, port priority, 250 m extend, VLAN isolation
6kV port and power lightning protection
Rackmount unmanaged design

IP-COM

Ask on WhatsApp Quote for quantities

Delivery within 2–5 business days across Saudi Arabia
Warranty according to the manufacturer
Tax invoice with every order
Technical support before and after purchase

Not sure this model fits your setup? Read the buying guide

Technical Specifications – F1126P-24-250W

Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3z, IEEE 802.3af, IEEE 802.3at
LED indicators	1 Link/Ack LED per port; 1 PoE Max LED per device; 1 Power LED per device
Fixed ports	24 x 10/100Base-TX Ethernet ports (Data/Power); 2 x 10/100/1000Base-T Ethernet ports (Data); 1 x 1000Base-X SFP port (combo)
Lightning protection	Port: 6kV; Power: 6kV
Forwarding mode	Store-and-forward
Switching capacity	8.8Gbps
Packet forwarding rate	6.55Mpps
Buffer	4Mb
MAC address table	16K
PoE pin assignment	Ports 1-24 support 802.3af/at standard PoE; pins 1 2 4 5 positive, 3 6 7 8 negative
PoE power supply	Max PoE output power: 230W; Per-port output power: 30W
Input voltage	AC: 220V 50Hz
Dimensions	440 x 178.8 x 44mm (L x W x H)
Port features	Four modes controlled by a front-panel hardware DIP switch: Standard sharing: all ports can communicate with each other; works as a standard unmanaged PoE switch. Port priority: ports 1-8 are high-priority ports, greatly reducing packet loss and lag during network congestion. Network extension: ports 17-24 drop to 10Mbps but transmission distance reaches up to 250 m; all ports can communicate with each other. VLAN isolation: ports 1-24 cannot communicate with each other but can all communicate with uplink ports G1 and G2/SFP2, isolating broadcast storms and DHCP conflicts.
Operating environment	Operating temperature: 0°C to 45°C; Operating humidity: 10% to 90%RH, non-condensing; Storage temperature: -40°C to 70°C; Storage humidity: 5% to 90%RH, non-condensing
Certifications	CCC, FCC, CE, RoHS

Source: IP-COM official website. Specifications are subject to change by the manufacturer.

PRACTICAL ANSWERS

Network planning questions

Should I choose a router, a switch or an access point?

Start with the task: connecting networks, adding wired device ports, or providing wireless coverage. A single installation may need more than one device type. Share a site diagram and device list so the proposed roles and connections are clear.

Why is wireless coverage weak in some rooms?

Check the access point location, building layout, obstacles and the number of active devices. Measure coverage where people actually work before choosing extra equipment; changing the internet package alone may not address a coverage problem.

How do I select a switch for powered network devices?

List the devices to be connected and check each device’s power requirements against the switch’s per-port capability and total documented power budget. Also review uplink capacity and reserve ports for the expansion you actually expect.

Can the guest network be separated from business devices?

Define which devices and services guests should be able to reach, then check whether the router, switch and access points support the required separation. Test the resulting access rules; a different wireless network name alone is not the acceptance test.

What information helps plan a network upgrade?

Provide floor plans, current equipment models, internet connections, cabling details and peak device counts. Describe the applications that matter most and the observed problem, such as disconnections or slow local file access.

How should network performance be checked after installation?

Agree on the locations and representative workloads to test, then record wired and wireless results separately. Check connectivity, coverage and access rules during normal use, and retain a diagram and configuration backup for support.