Skip to Content
Rasid integrated technologies
Request a solution
  1. All products
  2. Networking & Communications
  3. Network Switches
  4. IP-COM F1118P-16-150W 16-Port PoE Rack Switch, 2 GE Uplinks + SFP, 130W PoE
  5. Network Switches

IP-COM F1118P-16-150W 16-Port PoE Rack Switch, 2 GE Uplinks + SFP, 130W PoE

  • 16 x 10/100 Mbps PoE ports (IEEE 802.3af/at)
  • 2 x Gigabit uplink ports + 1 SFP combo port
  • Max. PoE output 130W, up to 30W per port
  • 4 DIP-switch modes: standard, port priority, extend, VLAN isolation
  • Extend mode: up to 250 m on ports 9–16
  • 6 kV lightning protection on ports and power
  • Rack-mount unmanaged design
IP-COM
Price
⃁ 437.33 ⃁ 437.33 ⃁ 546.66
(Tax excluded)
Ask on WhatsApp Quote for quantities
  • Delivery within 2–5 business days across Saudi Arabia
  • Warranty according to the manufacturer
  • Tax invoice with every order
  • Technical support before and after purchase

Not sure this model fits your setup? Read the buying guide

Technical Specifications – F1118P-16-150W

Network standardsIEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3z, IEEE 802.3af, IEEE 802.3at
LED indicators1 Link/Act LED per port; 1 PoE Max LED per device; 1 Power LED per device
Fixed ports16 x 10/100Base-TX Ethernet ports (Data/Power); 2 x 10/100/1000Base-T Ethernet ports (Data); 1 x 1000Base-X SFP port (combo)
Lightning protectionPort: 6 kV; Power supply: 6 kV
Forwarding modeStore-and-forward
Switching capacity7.2 Gbps
Packet forwarding rate5.36 Mpps
Switching buffer2.75 Mb
MAC address table4K
Power pin assignmentPorts 1–16 support IEEE 802.3af/at PoE; 1/2/4/5 positive (+), 3/6/7/8 negative (−)
PoE power supplyMax. PoE output power: 130W; Max. output power per port: 30W
Input voltageAC 220V 50Hz
Dimensions (L x W x H)294 x 178.8 x 44 mm
Port featuresControlled by a hardware DIP switch on the front panel, four modes: Standard sharing – all ports can communicate, works as a standard unmanaged PoE switch; Port priority – ports 1–8 are high-priority ports, greatly reducing packet loss and lag during network congestion; Network extend – ports 9–16 drop to 10 Mbps with transmission distance up to 250 m, all ports can communicate; VLAN isolation – ports 1–16 cannot communicate with each other but can all communicate with uplinks G1 and G2/SFP2, isolating broadcast storms and DHCP conflicts
EnvironmentOperating temperature: 0°C to 45°C; Storage temperature: -40°C to 70°C; Operating humidity: 10%–90% RH, non-condensing; Storage humidity: 5%–90% RH, non-condensing
CertificationsCCC, FCC, CE, RoHS

Source: IP-COM official website. Specifications are subject to change by the manufacturer.

PRACTICAL ANSWERS

Network planning questions

Should I choose a router, a switch or an access point?

Start with the task: connecting networks, adding wired device ports, or providing wireless coverage. A single installation may need more than one device type. Share a site diagram and device list so the proposed roles and connections are clear.

Why is wireless coverage weak in some rooms?

Check the access point location, building layout, obstacles and the number of active devices. Measure coverage where people actually work before choosing extra equipment; changing the internet package alone may not address a coverage problem.

How do I select a switch for powered network devices?

List the devices to be connected and check each device’s power requirements against the switch’s per-port capability and total documented power budget. Also review uplink capacity and reserve ports for the expansion you actually expect.

Can the guest network be separated from business devices?

Define which devices and services guests should be able to reach, then check whether the router, switch and access points support the required separation. Test the resulting access rules; a different wireless network name alone is not the acceptance test.

What information helps plan a network upgrade?

Provide floor plans, current equipment models, internet connections, cabling details and peak device counts. Describe the applications that matter most and the observed problem, such as disconnections or slow local file access.

How should network performance be checked after installation?

Agree on the locations and representative workloads to test, then record wired and wireless results separately. Check connectivity, coverage and access rules during normal use, and retain a diagram and configuration backup for support.

Explore this topic