Hikvision DS-PM1-I1-WB Wireless Single Input Transmitter, 433MHz, 1 Zone + 1 PGM

Small size design, which can be put into wired detector easily
433MHz two-way wireless communication
LED display, show the real status of device
With one tamper input and one PGM, can be used as zone input or alarm outpout
With 3.3v voltage output, can be used to power up external wired detector
Detection of device removal by accelerometer

Ask on WhatsApp Quote for quantities

Delivery within 2–5 business days across Saudi Arabia
Warranty according to the manufacturer
Tax invoice with every order
Technical support before and after purchase

Not sure this model fits your setup? Read the buying guide

Documents

Hikvision_DS-PM1-I1-WB_Datasheet.pdf

Overview of Hikvision DS-PM1-I1-WB

The Hikvision DS-PM1-I1-WB is a single input wireless transmitter that turns a wired detector into a wireless device. Its small size lets it fit inside a wireless-ready detector, and it provides one alarm input, one tamper input and one PGM that can work as a zone input or alarm output. A 3.3v output (up to 10mA) can power the connected wired detector, and an accelerometer detects removal of the device. It communicates over two-way 433MHz wireless with up to 1300m range and is powered by 3 CR123 batteries with up to 5 years of standby time. Useful for retrofitting villas, offices and shops without new cabling.

Technical Specifications – Hikvision DS-PM1-I1-WB

Hardware features

Serial port	1
Power switch	1
Alarm input	1 Alarm, 1 Tamper
Alarm output	1 PGM, AM/Output
3.3v Output	1, up to 10mA

Display

Indicator	3: Alarm/Tamper（Red）, Fault（Amber）, Signal Strength（Green/Red）

Electrical characteristics

Power supply	3 CR123
Operation humidity	10%~90%
Operation temperature	–10℃ ~ 55℃
Power consumption	Quiescent current: 40.29 uA Max current: 47.85mA Voltage: 3 VDC
Battery life span	Up to 5 years (standby time)

Wireless transmission

RF frequency	433MHz
RF method	Two-way communication
RF modulation	2GFSK
RF distance	1300m

General

Installation method	Put inside Wireless Ready Detector
Dimension(WxHxD)	1024120mm
Weight	35g(Without Battery), 90g(With Battery)

Source: Hikvision official website. Specifications are subject to change by the manufacturer.