Hikvision DS-3T0506P 4-Port Gigabit Unmanaged Industrial PoE Switch, 2 SFP, -40~75°C

Full gigabit port
The backplane bandwidth is 20 Gbps
Supports PoE power supply and IEEE 802.3AF/AT standards.
The maximum output power of each PoE port is 30 W.
PoE management: PoE device detection and PoE power management
Adopt redundant dual power input design
Die cast aluminum alloy housing.
No fan, -40 °C to 75 °C operating ambient temperature.
MTBF ≥ 400,000 hours.

Ask on WhatsApp Quote for quantities

Delivery within 2–5 business days across Saudi Arabia
Warranty according to the manufacturer
Tax invoice with every order
Technical support before and after purchase

Not sure this model fits your setup? Read the buying guide

Documents

Hikvision_DS-3T0506P_Datasheet.pdf

Overview of Hikvision DS-3T0506P

The Hikvision DS-3T0506P is a full Gigabit unmanaged industrial PoE switch with four Gigabit RJ45 PoE ports and two Gigabit fiber optical ports. Each PoE port delivers up to 30 W (IEEE 802.3af/at) within a 120 W budget, with PoE device detection and power management. Its die-cast aluminum, fan-free housing operates from -40 °C to 75 °C, supports redundant dual power inputs, offers 6 kV surge protection and an MTBF of at least 400,000 hours. It is built for demanding Saudi sites such as factories, oil and gas facilities, ports, traffic cabinets and remote perimeter points.

Technical Specifications – Hikvision DS-3T0506P

General

Shell	Metal material, fan-free design
Net Weight	0.7 kg (1.54lb)
Gross Weight	1.2 kg (2.65lb)
Dimensions (W × H × D)	52.0 mm × 140.0 mm × 110.0 mm (2.05'' ×5.51'' ×4.33'')
Operating Temperature	-40 °C to 75 °C (-40 °F to 167 °F)
Storage Temperature	-40 °C to 85 °C (-40 °F to 185 °F)
Operating Humidity	5% to 95% (no condensation)
Relative Humidity	5% to 95% (no condensation)
Max. Power Consumption	120 W
Power Consumption In Idle	10 W
Surge Protection	6 KV

Network Parameters

Ports	4 × Gigabit RJ45 port,2 × Gigabit fiber optical port
MAC Address Table	4 K
Switching Capacity	20 Gbps

PoE Power Supply

PoE Standard	IEEE 802.3af,IEEE 802.3at
PoE Power Pin	Mid-span: 1/2(+), 3/6(-)
Max. Port Power	30 W
PoE Port	PoE: Ports 3 to 6
PoE Power Budget	120 W

Approval

EMC	FCC (47 CFR Part 15, Subpart B),CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020),IC (ICES-003: Issue 7:2020),RCM (AS/NZS CISPR 32: 2015)
Safety	UL (UL 60950-1),CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017)
Chemistry	CE-RoHS (2011/65/EU)

Source: Hikvision official website. Specifications are subject to change by the manufacturer.

PRACTICAL ANSWERS

Network planning questions

Should I choose a router, a switch or an access point?

Start with the task: connecting networks, adding wired device ports, or providing wireless coverage. A single installation may need more than one device type. Share a site diagram and device list so the proposed roles and connections are clear.

Why is wireless coverage weak in some rooms?

Check the access point location, building layout, obstacles and the number of active devices. Measure coverage where people actually work before choosing extra equipment; changing the internet package alone may not address a coverage problem.

How do I select a switch for powered network devices?

List the devices to be connected and check each device’s power requirements against the switch’s per-port capability and total documented power budget. Also review uplink capacity and reserve ports for the expansion you actually expect.

Can the guest network be separated from business devices?

Define which devices and services guests should be able to reach, then check whether the router, switch and access points support the required separation. Test the resulting access rules; a different wireless network name alone is not the acceptance test.

What information helps plan a network upgrade?

Provide floor plans, current equipment models, internet connections, cabling details and peak device counts. Describe the applications that matter most and the observed problem, such as disconnections or slow local file access.

How should network performance be checked after installation?

Agree on the locations and representative workloads to test, then record wired and wireless results separately. Check connectivity, coverage and access rules during normal use, and retain a diagram and configuration backup for support.